Filter Catalog Steep roof

General Information

2963
Consider the spectrum adaptation term:
237510
00.718

Environmental impact per m2 component by indicator

Manufacture and disposal, without taking into account the amortization periods according to SIA 2032

4688299403.1
Hide products without information
102225
Hide products without information
2960.01
Hide products without information
26.76157.68
Hide products without information

Assembly

Manufacturer

Search assembly number

INFO: If you search for the Part Number , are all above Filter ignored and adapted to the new results.
Page 2 of 4. There were 72 matching component found.
Lignum ID-№ Base structure Construction height Values of airborne sound insulation
Graphic Paneling Weight
Origin of sound insulation values U-value

E0125

 Ribs / rafters 249 mm 51 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Exterior insulation layer 1: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: no composite action
Cavity dampening: Fiber insulation with 5≤ r ≤35 [kPa*s/m²
Bond: Stiff, execution of the prior art.
Battens / profiles: Wood lath b=60mm
Cavity dampening: Mineral wool
Covering below 1st layer: Plasterboard type A
Covering below 2nd layer: Plasterboard type A
Surface below: Smoothed joints

Insulation between and on supporting structure with covering 93 kg/m2 -3 dB
Verified calculation ≈ 0.129 W/m2K -10 dB
Detail IFC4 LOD300

E0130

 Ribs / rafters 249 mm 52 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Exterior insulation layer 1: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: no composite action
Cavity dampening: Fiber insulation with 5≤ r ≤35 [kPa*s/m²
Bond: Stiff, execution of the prior art.
Battens / profiles: Wood lath b=60mm
Cavity dampening: Mineral wool
Covering below 1st layer: Gypsum fiber or hard gypsum board ≥ 1000kg/m³
Covering below 2nd layer: Gypsum fiber or hard gypsum board ≥ 1000kg/m³
Surface below: Glued joints/smoothed

Insulation between and on supporting structure with covering 103 kg/m2 -3 dB
Verified calculation ≈ 0.13 W/m2K -9 dB
Detail IFC4 LOD300

E0135

 Solid wood panel 419 mm 50 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Exterior insulation layer 1: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: no composite action
Supporting structure: Wood panel for structural purposes, Cross laminated timber, laminated timber ≥ 450 kg/m³

Insulation on supporting structure 112 kg/m2 -2 dB
Verified calculation ≈ 0.182 W/m2K -7 dB
Detail IFC4 LOD300

E0136

 Solid wood panel 474 mm 55 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Exterior insulation layer 1: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: no composite action
Supporting structure: Wood panel for structural purposes, Cross laminated timber, laminated timber ≥ 450 kg/m³
Bond: Stiff, execution of the prior art.
Battens / profiles: Wood lath transversely b=60mm
Cavity dampening: Mineral wool
Covering below 1st layer: Plasterboard type A
Surface below: Smoothed joints

Insulation on supporting structure with covering 125 kg/m2 -3 dB
Verified calculation ≈ 0.151 W/m2K -9 dB
Detail IFC4 LOD300

E0137

 Solid wood panel 489 mm 57 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Exterior insulation layer 1: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: no composite action
Supporting structure: Wood panel for structural purposes, Cross laminated timber, laminated timber ≥ 450 kg/m³
Bond: Stiff, execution of the prior art.
Battens / profiles: Wood lath transversely b=60mm
Cavity dampening: Mineral wool
Covering below 1st layer: Plasterboard type A
Covering below 2nd layer: Plasterboard type A
Surface below: Smoothed joints

Insulation on supporting structure with covering 136 kg/m2 -2 dB
Verified calculation ≈ 0.15 W/m2K -8 dB
Detail IFC4 LOD300

E0139

 Solid wood panel 494 mm 59 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Exterior insulation layer 1: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: no composite action
Supporting structure: Wood panel for structural purposes, Cross laminated timber, laminated timber ≥ 450 kg/m³
Bond: no composite action
Coupling: Rubber mounted direct hanger b=60mm
Battens / profiles: Wood lath transversely b=60mm
Cavity dampening: Mineral wool
Covering below 1st layer: Plasterboard type A
Surface below: Smoothed joints

Insulation on supporting structure with covering 283 kg/m2 -5 dB
Verified calculation ≈ 0.141 W/m2K -13 dB
Detail IFC4 LOD300

E0140

 Solid wood panel 509 mm 63 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Exterior insulation layer 1: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: no composite action
Supporting structure: Wood panel for structural purposes, Cross laminated timber, laminated timber ≥ 450 kg/m³
Bond: no composite action
Coupling: Rubber mounted direct hanger b=60mm
Battens / profiles: Wood lath transversely b=60mm
Cavity dampening: Mineral wool
Covering below 1st layer: Plasterboard type A
Covering below 2nd layer: Plasterboard type A
Surface below: Smoothed joints

Insulation on supporting structure with covering 294 kg/m2 -4 dB
Verified calculation ≈ 0.139 W/m2K -11 dB
Detail IFC4 LOD300

E0147

 BRESTA Solid Timber System, planked on one side 237 mm 36 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Sub-floor: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: Stiff, execution of the prior art.
Cavity dampening: Cellulose: Loose; not monitored
Lower skin layer 1: Vapor barrier polyethylene (PE)
Lower skin 2nd layer: Bresta Solid timber panel

Insulation between the supporting structure 106 kg/m2 -1 dB
Calculation ≈ 0.191 W/m2K -7 dB
Detail IFC4 LOD300

E0148

 Ribs / rafters 237 mm 37 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Sub-floor: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: Stiff, execution of the prior art.
Cavity dampening: Cellulose: Loose; not monitored
Lower skin layer 1: Vapor barrier polyethylene (PE)
Lower skin 2nd layer: Bresta Solid timber panel

Insulation between the supporting structure 111 kg/m2 -1 dB
Calculation ≈ 0.17 W/m2K -7 dB
Detail IFC4 LOD300

E0149

 Ribs / rafters 237 mm 38 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Sub-floor: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: Stiff, execution of the prior art.
Cavity dampening: Cellulose: Loose; not monitored
Lower skin layer 1: Vapor barrier polyethylene (PE)
Lower skin 2nd layer: Bresta Solid timber panel

Insulation between the supporting structure 115 kg/m2 -1 dB
Calculation ≈ 0.152 W/m2K -7 dB
Detail IFC4 LOD300

E0150

 Ribs / rafters 237 mm 39 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Sub-floor: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: Stiff, execution of the prior art.
Cavity dampening: Cellulose: Loose; not monitored
Lower skin layer 1: Vapor barrier polyethylene (PE)
Lower skin 2nd layer: Bresta Solid timber panel

Insulation between the supporting structure 124 kg/m2 -1 dB
Calculation ≈ 0.127 W/m2K -7 dB
Detail IFC4 LOD300

E0151

 Ribs / rafters 237 mm 40 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Sub-floor: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: Stiff, execution of the prior art.
Cavity dampening: Cellulose: Loose; not monitored
Lower skin layer 1: Vapor barrier polyethylene (PE)
Lower skin 2nd layer: Bresta Solid timber panel

Insulation between the supporting structure 133 kg/m2 -1 dB
Calculation ≈ 0.108 W/m2K -7 dB
Detail IFC4 LOD300

E0152

 Ribs / rafters 237 mm 49 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Sub-floor: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: Stiff, execution of the prior art.
Cavity dampening: Mineral wool
Lower skin layer 1: Vapor barrier polyethylene (PE)
Lower skin 2nd layer: Bresta Solid timber panel

Insulation between the supporting structure 100 kg/m2 -1 dB
Calculation ≈ 0.182 W/m2K -5 dB
Detail IFC4 LOD300

E0153

 Ribs / rafters 237 mm 51 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Sub-floor: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: Stiff, execution of the prior art.
Cavity dampening: Mineral wool
Lower skin layer 1: Vapor barrier polyethylene (PE)
Lower skin 2nd layer: Bresta Solid timber panel

Insulation between the supporting structure 103 kg/m2 -1 dB
Calculation ≈ 0.158 W/m2K -5 dB
Detail IFC4 LOD300

E0154

 Ribs / rafters 237 mm 52 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Sub-floor: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: Stiff, execution of the prior art.
Cavity dampening: Mineral wool
Lower skin layer 1: Vapor barrier polyethylene (PE)
Lower skin 2nd layer: Bresta Solid timber panel

Insulation between the supporting structure 107 kg/m2 -1 dB
Calculation ≈ 0.14 W/m2K -5 dB
Detail IFC4 LOD300

E0155

 Ribs / rafters 237 mm 54 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Sub-floor: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: Stiff, execution of the prior art.
Cavity dampening: Mineral wool
Lower skin layer 1: Vapor barrier polyethylene (PE)
Lower skin 2nd layer: Bresta Solid timber panel

Insulation between the supporting structure 113 kg/m2 -1 dB
Calculation ≈ 0.113 W/m2K -5 dB
Detail IFC4 LOD300

E0156

 Ribs / rafters 237 mm 56 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Sub-floor: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Bond: Stiff, execution of the prior art.
Cavity dampening: Mineral wool
Lower skin layer 1: Vapor barrier polyethylene (PE)
Lower skin 2nd layer: Bresta Solid timber panel

Insulation between the supporting structure 118 kg/m2 -1 dB
Calculation ≈ 0.099 W/m2K -5 dB
Detail IFC4 LOD300

E0157

 BRESTA Solid Timber System 382 mm 49 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Exterior insulation layer 1: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Sheathed above 1st layer: Vapor barrier polyethylene (PE)
Bond: Stiff, execution of the prior art.
Supporting structure: Bresta Solid timber panel

Insulation on supporting structure 119 kg/m2 -2 dB
Calculation ≈ 0.216 W/m2K -7 dB
Detail IFC4 LOD300

E0158

 BRESTA Solid Timber System 422 mm 50 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Exterior insulation layer 1: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Sheathed above 1st layer: Vapor barrier polyethylene (PE)
Bond: Stiff, execution of the prior art.
Supporting structure: Bresta Solid timber panel

Insulation on supporting structure 124 kg/m2 -2 dB
Calculation ≈ 0.189 W/m2K -7 dB
Detail IFC4 LOD300

E0159

 BRESTA Solid Timber System 442 mm 50 dB
Roofing: Roof tiles
Battens / profiles: Wood laths 48x48 + roof laths 48x24mm e=350mm
Under the roof: Roofing underlay
Exterior insulation layer 1: Thermal insulation material with compressive strength ≥100kPa according to EN 826
Sheathed above 1st layer: Vapor barrier polyethylene (PE)
Bond: Stiff, execution of the prior art.
Supporting structure: Bresta Solid timber panel

Insulation on supporting structure 126 kg/m2 -2 dB
Calculation ≈ 0.177 W/m2K -7 dB
Detail IFC4 LOD300